Jet Kit (type 4) for PLT turbines Taper Gauge:No Taper Gauge 300mm long with 15 holes

300mm long with 15 holes

All our rotors have been balanced to reduce vibration

Maximum motor torque 28 Nm for a HP unit and 23Nm for a standard unit

The jet sleeve has a male 50mm (2" BSP) thread suitable for assembly with a valve or camlock fitting

This ensures that if you have a short in either a PV panel or in the React Pump that the wiring and MC4 fittings will be protected from high short circuit currents

Jet Kit (type 4) for PLT turbines Taper Gauge:No Taper Gauge 300mm long with 15 holesA jet kit is a handy spare part to have on hand for a PowerSpout turbine or can be used as part of a DIY turbine build. A jet kit includes: 1 x 50mm ball valve 1 x Jet sleeve and O ring 4 x Tapered jets 1 x Jet retaining cap These jets can be cut with a sharp knife from 2 25mm for our PowerSpout PLT turbines. You can add a taper gauge in the dropdown if you you wish. We also offer a twin pack jet kit which includes a free taper gauge. We offer 2