M9 x 1.0 BaerCoil Bottoming Tap (Helicoil Type) m 5 x 0.8 baercoil bottoming tap Pre-machining with a taper tap

Pre-machining with a taper tap (No

7 mm Thread length calculation 2

6010 EN-GJL 100 (GG-10) 0

In case the thread is deeper than expected

Diameter: 22

M9 x 1.0 BaerCoil Bottoming Tap (Helicoil Type) m 5 x 0.8 baercoil bottoming tap Pre-machining with a taper tapBaerCoil Tap HSSG (Bottoming Tap) Form D, Tolerance ISO 1 (4H) for Wire Thread Inserts ISO 2 (6H) D1 = 10. 3 mm D2 = 8 mm L1 = 85 mm L2 = 25 mm Square = 6. 3 mm BaerCoil: Thread Repair of damaged or worn out threads Recovery of rejected items Thread Armour Plating. For material with low shear strenght eg. aluminium alloys and magnesium alloys. Due to narrow and exact tolerances the new thread normally is stronger than the original one. Use in machine