5560m2 Clearwater Bypass Separator | NSBE010 JDK150-500 so in this instance the

so in this instance the float would be set at a height that the alarm would indicate when the system was running unusually high (and not necessarily when the system requires a de-sludge)

The JDK-S-200 is a direct replacement of the EL-S-200W featuring less energy consumption (up to 30% - depending on the application) and less overall dimensions (also by about 30%) compared to the SLL and EL series

Installed in ‘wet’ or ‘dry’ ground conditions

Commissioning and Servicing Information

smaller in size and more energy efficient than the Hiblow HP80 and works in the exact same way

5560m2 Clearwater Bypass Separator | NSBE010 JDK150-500 so in this instance theThis is the Clearwater Bypass Separator NSBE010 is suitable for areas up to 5,560 sq m. Bypass separators are used when it is considered an acceptable risk not to provide full treatment, for very high flows, and are used, for example, where the risk of a large spillage and heavy rainfall occurring at the same time is small, e. g. Surface car parks Roadways Lightly contaminated commercial areas Clearwater Bypass Separator drawing NSBE010 NSBE030